| Disconnect the orange Airport cable, and multicolored connector from the logic board. If the multicolored connector is difficult to remove, you may have to use a flat blade or other tool to loosen it. |
| Remove the pin holding the orange data cable to the frame |
| Disconnect the 6 cables indicated in the photo. There are also two screws (not circled) fastening down the middle of the logic board which will need to be removed. Note that in this image the hard drive has already been removed. You may also simply disconnect the orange hard drive cable. |
| Gently lift up on the logic board where indicated, making sure that the logic board is free of all the previously disconnected cables. |
| Continue tilting the logic board up, disconnecting the fan cable once you have enough room. |
